The short answer: Breville’s ThermoJet machines (Bambino, Bambino Plus, Barista Pro, Barista Touch and Touch Impress) are ready in 3 seconds, the thermocoil Barista Express Impress takes up to 55 seconds, and the Dual Boiler takes about 10 minutes. The heating system decides it. ThermoJet heats only the water passing through it, a thermocoil heats a coil of water and needs under a minute, and boilers heat a tank of water and take several minutes. Those figures are for the machine to reach brewing temperature; a cold portafilter and cup still cool the first shot, so run hot water through them first.
Breville Heat-Up Times by Model
| Machine | Model number | Heating system | Heat-up time (Breville) |
|---|---|---|---|
| Bambino | BES450 | ThermoJet | 3 seconds |
| Bambino Plus | BES500 | ThermoJet | 3 seconds |
| Barista Pro | BES878 | ThermoJet | 3 seconds |
| Barista Touch | BES880 | ThermoJet | 3 seconds |
| Barista Touch Impress | BES881 | ThermoJet | 3 seconds |
| Oracle Jet | BES985 | ThermoJet | “Ready to go in seconds” |
| Barista Express | BES870XL | Thermocoil | Not stated; the power light flashes until it reaches temperature |
| Barista Express Impress | BES876 | Thermocoil | Up to 55 seconds |
| Dual Boiler | BES920 | Two boilers | About 10 minutes |
| Oracle Dual Boiler | BES995 | Two boilers | Not stated; the Breville+ app can turn it on and pre-heat it remotely |
Times are from Breville’s US product and comparison pages and manuals, checked November 16, 2026: the Bambino and Barista Pro and Touch comparisons, and the Oracle Jet, Express Impress and Dual Boiler manuals.
ThermoJet: 3 Seconds
ThermoJet is Breville’s fast heater: water is heated as it flows through, so there’s no tank to warm up. Breville says the Bambino, Bambino Plus, Barista Pro and Barista Touch reach extraction temperature in 3 seconds, and the Oracle Jet manual says it’s ready “in seconds.” Breville also says ThermoJet is up to 32% more energy efficient than a thermoblock. The catch is that ThermoJet machines can’t brew and steam at the same time; they switch between the two.
Thermocoil: Under a Minute
The Barista Express and Express Impress use a thermocoil, a heated stainless steel coil that the water flows through. The Express Impress manual says the power light flashes “for up to 55 seconds” while the machine heats, and the machine is ready when the 1 CUP, 2 CUP and POWER lights stay on. The Barista Express manual describes the same flashing light without a time. After steaming, the Express automatically purges water into the drip tray to bring the thermocoil back to brewing temperature, so expect a short pause between steaming and the next shot.
Dual Boiler: About 10 Minutes
The Dual Boiler (BES920) heats two stainless steel boilers, one for brewing and one for steam. Its manual says it takes about 10 minutes to reach its default 200°F brewing temperature, and Breville recommends programming its auto-start to switch the machine on 15 minutes before you plan to use it. The Oracle Dual Boiler (BES995) has the same two-boiler layout with what Breville calls a triple heating system; Breville doesn’t publish its heat-up time, but its Breville+ app can turn the machine on and pre-heat it before you get to the kitchen. The reward is that both boilers stay hot, so you can pull a shot and steam milk at the same time.
How to Get a Hotter First Shot
Even a machine that’s at temperature in 3 seconds pours into a cold portafilter and a cold cup. Breville’s manuals suggest:
- Lock the empty portafilter into the group head and run a short burst of water through it to warm it.
- Fill your cup with hot water from the hot-water outlet or wand, then empty it before brewing.
- On the Dual Boiler, give the group head the full warm-up, or use the auto-start timer.
The Bambino manual’s troubleshooting table lists a portafilter and cup that weren’t pre-heated as the causes of coffee that isn’t hot enough.
Standby and Auto-Off
Breville machines turn themselves down when idle. The Bambino goes to standby after 10 minutes without use, and the Barista Express goes to sleep after 1 hour and turns off after 3 hours, per their manuals.
Ready in 3 seconds
Breville Bambino Plus
ThermoJet heating, PID control and hands-free milk texturing in an 11.9-inch-wide body.
Fastest breville with a grinder under $900
Breville Barista Pro
3-second ThermoJet heat-up, a 30-setting grinder and an LCD with a shot timer.
Choosing between models? Read Barista Express vs. Barista Pro, Bambino vs. Bambino Plus or our explainer on single boiler vs. dual boiler vs. heat exchanger machines.
Breville Heat-Up Time FAQ
How long does a Breville Barista Express take to heat up?
Breville doesn’t publish a time for the Barista Express. It uses a thermocoil heater like the Barista Express Impress, whose manual says the power light flashes for up to 55 seconds while it heats. The machine is ready when the light stops flashing.
How long does the Breville Bambino take to heat up?
3 seconds, according to Breville. The Bambino and Bambino Plus use the ThermoJet heating system.
Which Breville espresso machine heats up fastest?
The ThermoJet models: Bambino, Bambino Plus, Barista Pro, Barista Touch and Barista Touch Impress, which Breville rates at 3 seconds, plus the Oracle Jet, which its manual says is ready in seconds.
How long does the Breville Dual Boiler take to heat up?
About 10 minutes to reach its default 200°F, per its manual. Breville recommends setting its auto-start to turn the machine on 15 minutes before you use it.
Should I wait longer than the heat-up time before brewing?
For the hottest shot, yes: run hot water through the empty portafilter and into your cup first. The machine is at temperature, but a cold portafilter and cup cool the espresso.
Why is my Breville coffee not hot enough?
Breville’s manuals list a portafilter and cup that weren’t pre-heated as the usual causes. Run hot water through the portafilter and cup before brewing, and check the brew temperature setting on machines that let you adjust it.







