The short answer: a 4-slice toaster with four short slots takes about 10.5 to 13 by 10.5 to 12 inches of counter and stands about 7.5 inches tall. A long-slot 4-slice toaster (two long slots) is narrower and longer, about 8 by 15 to 16 inches. A 2-slice toaster is roughly 7 to 8.5 by 11 to 12 inches. Most weigh 5 to 8 pounds.
Makers list dimensions in different orders (width × depth, or length × width), so the tables below give the footprint as longest side × shortest side, plus height.
4-Slice Toasters (Four Short Slots)
| Toaster | Footprint (in) | Height (in) | Weight |
|---|---|---|---|
| Cuisinart CPT-142P1 Compact | 10.8 × 10.7 | 7.2 | — |
| Cuisinart CPT-180P1 Metal Classic | 11.15 × 10.65 | 7.5 | 6.1 lb |
| Cuisinart CPT-435P1 Countdown | 11 × 10.5 | 7.75 | — |
| KitchenAid KMT4115 | 11.62 × 11.4 | 7.48 | 7.2 lb |
| Breville BTA840 Die-Cast Smart Toaster | 11.9 × 10.9 | 7.7 | — |
| Hamilton Beach 24633G Extra-Wide Slot | 10.4 × 10.2 | 7.3 | — |
| Hamilton Beach 24910G Brushed Stainless | 11.22 × 10.94 | 7.48 | — |
| Smeg TSF03 | 13 × 11.81 | 7.75 | 8 lb |
4-Slice Long-Slot Toasters (Two Long Slots)
| Toaster | Footprint (in) | Height (in) | Weight |
|---|---|---|---|
| Breville BTA830 Die-Cast (long slot) | 14.9 × 7.7 | 7.5 | — |
| Breville BTA730 Bit More (long slot) | 16.1 × 8.1 | 7.6 | — |
| Smeg TSF02 | 15.37 × 8.13 | 8.39 | 7 lb |
| KitchenAid KMT5115 (discontinued at some retailers) | 18 × 9.63 | 10.13 | — |
2-Slice Toasters for Comparison
| Toaster | Footprint (in) | Height (in) | Weight |
|---|---|---|---|
| Cuisinart CPT-122 Compact | 11 × 6.5 | 7.2 | — |
| Cuisinart CPT-160P1 Metal Classic | 10.75 × 7.13 | 7.13 | — |
| Hamilton Beach 22633G | 11.3 × 7.5 | 7.5 | — |
| KitchenAid KMT2115 | 11.4 × 7.7 | 7.48 | 4.8 lb |
| Breville BTA720 Bit More | 11.3 × 8.2 | 7.3 | — |
| Breville BTA820 Die-Cast | 11.6 × 8.6 | 7.5 | — |
| Smeg TSF01 | 12.2 × 7.7 | 7.75 | 5 lb |
| Dash DVTS501 Clear View (2 long slots) | 15.7 × 6.6 | 7.8 | 4.5 lb |
| Revolution R180 Connect Plus | 11.65 × 6.13 | 8.4 | 6.28 lb |
Square 4-Slice or Long Slot: Which Fits Better?
- Four short slots make a near-square block about 11 inches each way. It suits a corner or a deep counter, and most models have separate controls for each pair of slots.
- Two long slots make a narrow, long toaster about 8 inches wide and 15 to 16 inches long. It fits along a backsplash or between other appliances, and it takes long oval slices of sourdough whole. More in long-slot vs. 4-slice toasters.
- A 4-slice toaster takes about half again as much counter area as a 2-slice. A Cuisinart CPT-180P1 covers about 119 square inches; Cuisinart’s 2-slice CPT-160P1 covers about 77.
What to Measure Before You Buy
- Counter depth and width, with a couple of inches around the toaster so the lever and crumb tray are easy to reach.
- Height under the upper cabinets. Toasters are 7 to 8.5 inches tall, and heat rises from the slots. Breville’s Die-Cast manual asks for 8 inches (20 cm) of clear space above the toaster and 4 inches (10 cm) at the sides; Hamilton Beach says not to use a toaster near cabinets.
- Where the lever and crumb tray are. Long-slot toasters have the lever on a short end; Breville’s Die-Cast models have a front crumb tray, while many others pull out from the side or back.
- Outlet position. Cords are short by design, so the toaster has to sit within reach of a counter outlet. A 4-slice toaster draws up to 15 A, see toaster and microwave on the same circuit.
Compact 4-slice: 10.8 x 10.7 in
Cuisinart CPT-142P1 4-Slice Compact Toaster
One of the smaller 4-slice footprints: four 1.5-inch slots in 10.8 x 10.7 inches, 7.2 inches tall, with a 3-year limited warranty.
Toaster Dimensions FAQ
How wide is a 4-slice toaster?
A square 4-slice toaster is about 10.5 to 13 inches wide and about as deep. Cuisinart’s CPT-142P1 is 10.8 × 10.7 inches; Smeg’s TSF03 is 13 × 11.81 inches.
How tall is a toaster?
Most are 7 to 8 inches tall: Cuisinart’s CPT-122 is 7.2 inches, KitchenAid’s KMT4115 7.48 inches. Revolution’s R180 Connect Plus is 8.4 inches, and KitchenAid’s long-slot KMT5115 10.13 inches.
What’s the smallest 4-slice toaster?
Among current models with published sizes, Hamilton Beach’s 24633G (10.4 × 10.2 inches, 7.3 inches tall) and Cuisinart’s CPT-142P1 (10.8 × 10.7 inches) have the smallest footprints.
How much does a toaster weigh?
About 4.5 to 8 pounds: Dash’s Clear View 4.5 lb, KitchenAid’s KMT2115 4.8 lb, Smeg’s TSF01 5 lb, KitchenAid’s KMT4115 7.2 lb and Smeg’s TSF03 8 lb.
How big is a 2-slice toaster?
About 6.5 to 8.6 inches wide and 10.75 to 12.2 inches long, and 7 to 8.4 inches tall. Cuisinart’s CPT-122 is one of the narrowest at 6.5 inches.
Sources
- Cuisinart CPT-122, CPT-142P1, CPT-160P1, CPT-180P1, CPT-435P1
- KitchenAid KMT2115 spec sheet (PDF), KMT4115 spec sheet (PDF), Webstaurant: KMT5115
- Breville BTA720, BTA730, BTA820, BTA830, BTA840
- Hamilton Beach 22633G, 24633G, 24910G
- Smeg TSF01CRUS, TSF02CRUS, TSF03CRUS
- Dash Clear View Toaster
- Revolution Cooking products
- Breville BTA820/830/840 manual (PDF) and Hamilton Beach 22633 use and care guide (PDF)






