The short answer: buy the Sharp unless you’re matching a GE Profile kitchen. Both are 24-inch, 1.2 cu ft drawers with sensor cooking. Sharp’s SMD2470ASY has the longer magnetron warranty (5 years on the part), a published cutout for both standard and flush installs, wider choice of sizes and features, and is assembled in Memphis, Tennessee. GE Profile’s PWL1126SWSS is rated 1,000 W versus Sharp’s 950 W, and suits a kitchen full of GE Profile appliances.

Prices checked November 19, 2026: Sharp SMD2470ASY $1,497 on Amazon (sold by Amazon) and $1,499.99 on Sharp’s shop (MSRP $1,899.99). Sharp’s 30-inch SMD3070ASY was $1,597 on Amazon. Check GE’s site or a dealer for the PWL1126SWSS price.

Sharp vs. GE Profile Drawer at a Glance

Sharp SMD2470ASYGE Profile PWL1126SWSS
Width24 in (30-in SMD3070ASY also sold)24 in
Capacity1.2 cu ft1.2 cu ft
Cooking power950 W1,000 W (retailer listings)
Sensor cookingYesYes
Standard cutout (W × H × D)22 1/8 × 15 9/16 × 23 1/2 inSee GE spec sheet
Flush cutout (W × H × D)24 3/16 × 16 7/8 × 23 1/2 inFlush installation supported
Product size (W × H × D)See Sharp spec sheetAbout 23.8 × 15.9 × 23.3 in (retailer listings)
Install locationsUnder a counter, in an island or peninsula, or below a wall oven (2-in gap)Per GE spec sheet; anti-tip block set 14 13/16 in above the floor
Warranty1 yr parts and in-home labor; magnetron 4 more years (part only)See GE warranty
Where assembledMemphis, Tennessee (Sharp)Not stated
Price, Nov 19$1,497 Amazon / $1,499.99 SharpCheck GE

Where Sharp Pulls Ahead

  • Choice. Sharp sells drawers from $1,199.99 (SMD2420MS) to $2,499.99, including a 30-inch model, a Wi-Fi model (SMD2489ES), color “Deco” models and a 1.4 cu ft convection drawer (SMD2499FS). GE Profile has one 24-inch drawer.
  • Magnetron coverage. Sharp adds 4 years on the magnetron part after the first year (5 in total) on the SMD2470ASY, and 5 years on the SMD2489ES and SMD2499FS.
  • US assembly. Sharp says its microwave drawers are “proudly assembled in Memphis, Tennessee.” GE doesn’t state where the PWL1126SWSS is assembled.

Where GE Profile Pulls Ahead

  • Power: 1,000 W against 950 W, a 5% difference you’ll notice only on large portions.
  • Matching: if your range, dishwasher and fridge are GE Profile, the handles, stainless finish and control style match.

Installation Notes

Measure the cutout before you buy either. Sharp’s standard cutout is 22 1/8 inches wide, 15 9/16 inches high and 23 1/2 inches deep; a flush install needs a larger 24 3/16 × 16 7/8-inch opening. Sharp’s drawer needs a 120 V, 15 A or higher outlet (a separate circuit is recommended), and the floor of the cabinet must hold 100 lb. Sharp’s 1.4 cu ft convection drawer, the SMD2499FS, needs a taller 19 3/8-inch cutout than every other drawer here. GE’s spec sheet requires an anti-tip block 14 13/16 inches above the floor.

Which Should You Buy?

  • Buy the Sharp SMD2470ASY for most kitchens: published flush and standard cutouts, 5-year magnetron coverage and the widest lineup if you later want Wi-Fi or a 30-inch drawer.
  • Buy the GE Profile PWL1126SWSS if you’re outfitting a GE Profile kitchen or want the extra 50 W.

Best microwave drawer

Sharp SMD2470ASY

24-inch, 1.2 cu ft, 950 W microwave drawer with sensor cooking, for standard or flush installation.

30-inch option

Sharp SMD3070ASY

30-inch, 1.2 cu ft, 950 W microwave drawer for 30-inch base cabinets.

Sharp’s drawer against Bosch’s is in Sharp vs. Bosch microwave drawer. More options are in the best microwave drawers.

Sharp vs. GE Profile Microwave Drawer FAQ

Is a Sharp or GE Profile microwave drawer better?

Sharp, for most buyers: more models, a 5-year magnetron part warranty and published cutouts. GE Profile is rated 1,000 W to Sharp’s 950 W and matches other GE Profile appliances.

What size cutout does a Sharp microwave drawer need?

The 24-inch SMD2470ASY needs 22 1/8 inches wide, 15 9/16 inches high and 23 1/2 inches deep for a standard install, or 24 3/16 × 16 7/8 × 23 1/2 inches for flush.

Are Sharp microwave drawers made in the USA?

Sharp says its microwave drawers are assembled in Memphis, Tennessee. The SMD2499FS spec sheet reads “Assembled in USA from imported and domestic parts.”

How many watts is a microwave drawer?

Sharp’s drawers are 950 W (900 W on the convection SMD2499FS). Retailers list GE Profile’s PWL1126SWSS at 1,000 W.

Can a microwave drawer go under a wall oven?

Sharp’s install manual allows it below an electric or gas wall oven with at least 2 inches between them.

Sources