The short answer: a Little Green smells when dirty water sits in the hose, the dirty tank or the tool between uses, so clean all three the same day. Before you turn it off, suck up a bowl of clean water to flush the hose (or hold the HydroRinse tool’s trigger for 30 seconds), then lift the tool so the hose drains into the tank. Empty and rinse the dirty tank, pull the clear lens off the tool and rinse it, rinse the duckbill gasket, and let everything dry before you put it away.

These steps come from Bissell’s current Little Green guide (models 1400B and 3369) and its Little Green HydroSteam guide (3532, 3618, 3605, 3606). Pet Pro, Max Pet and Mini models clean up the same way.

Step by Step After Every Use

  1. Flush the hose while the machine is still on.
    • With a HydroRinse self-cleaning hose tool (select models): snap it onto the hose, hold the hose and tool upright with the machine on, and hold the trigger for 30 seconds.
    • Without it: suck up clean water from a bowl or bucket, then lift and stretch the hose until all the water has cleared into the dirty tank. On the HydroSteam, Bissell says not to suck up more than 32 ounces.
    • Finally lift the tool and point it upward so any water left in the hose drains into the dirty tank. This one step prevents most smells.
  2. Turn it off and unplug it.
  3. Empty the dirty water tank. Lift the tank release latch, take the tank off and pour it out. Empty it whenever it reaches the MAX line, too; don’t let it overfill.
  4. Rinse the dirty tank with warm water. Bissell says the plastic tanks aren’t dishwasher safe. Put the tank back and lower the latch.
  5. Clean the tool. Push down the button above the hose grip and pull the tool straight off (don’t twist it). Pull the clear lens off by its tab, rinse the lens and tool with warm water, and let them dry before reinstalling.
  6. Rinse the duckbill gasket. Remove it, rinse it with water, and reinstall it so it’s properly aligned.
  7. Check the spray nozzle for dirt and brush it clean with a soft brush if needed.
  8. Dry and store. Wipe the outside, wrap the cord and hose, and store it indoors somewhere dry. Leave the dirty tank and tool lens to air-dry fully first.

You can leave leftover formula mixed in the clean water tank for the next job, according to Bissell’s older 1400-series guide, but don’t leave anything in the dirty tank.

Little Green HydroSteam (3618, 3532)

  1. Empty and rinse the dirty water tank. To open it, hold the tank from the bottom and rotate the handle backward to unlock the lid; rotate it forward to lock.
  2. Clean the hose with the HydroRinse tool: turn the dial to SteamWash Max Clean mode, hold the hose upright with the machine on and press the HydroRinse trigger for 30 seconds.
  3. Lift the latch on the clear nozzle to remove it and rinse it. Wipe debris off the steam nozzle.
  4. Wrap the hose and store it indoors in a dry place.

If you run the HydroSteam with plain water, Bissell recommends distilled water to prevent hard-water buildup.

If It Already Smells

Take it apart and clean every wet part: the dirty tank, its lid, the tool and lens, the duckbill gasket and the hose. Flush the hose with warm (not boiling) water two or three times, then hang the hose and let the tank dry with the lid off for a day. Use Bissell’s portable formulas for the next clean; Bissell’s guide warns that “other formulas or household cleaners may cause defects or damage,” and the older guide says formulas with lemon or pine oil can damage the machine and void the warranty. Bissell’s manuals don’t approve bleach. Don’t run a hot or chemical flush the guide doesn’t call for.

If the smell is coming from the carpet rather than the machine, see why does my carpet smell after cleaning.

Common Little Green Cleaning Mistakes

MistakeProblemFix
Turning it off with water in the hoseWater drips back and sits in the hosePoint the tool up to drain the hose into the tank before shutting off
Leaving the dirty tank full overnightSour, musty smellEmpty and rinse the same day
Twisting the tool offCan damage the button lockPush the button and pull straight off
Washing tanks in the dishwasherBissell says the tanks aren’t dishwasher safeRinse by hand with warm water
Boiling or microwaved waterBissell’s guide says not to use boiling water or microwave itUse warm tap water up to 140°F
Household cleaners in the tankDamage, foam, voided warrantyUse Bissell portable formulas

$94.99 on Amazon, Nov. 21, 2026

Bissell Little Green 1400B

The basic Little Green: 48-ounce tank, 4-inch Tough Stain Tool and Bissell's 1-year warranty.

Cleaning a Little Green FAQ

Why does my Bissell Little Green smell?

Dirty water left in the hose, tank or tool. Flush the hose with clean water before turning it off, empty and rinse the tank, and dry the parts before storing.

How do you clean a Little Green hose?

Suck up clean water from a bowl with the machine on, then lift and stretch the hose until it clears. Models with the HydroRinse tool: hold the trigger for 30 seconds with the tool and hose upright.

Can you put bleach in a Bissell Little Green?

Bissell’s guides don’t allow it. They say to use only Bissell formulas intended for the machine; household cleaners can damage it.

Can you leave water in a Little Green?

Bissell’s older guide says leftover formula and water can stay in the clean tank for the next job. Always empty the dirty tank.

Is the Little Green dishwasher safe?

No. Bissell says the plastic tanks aren’t dishwasher safe. Rinse them by hand.

Sources